Features
|
VM safety limit switches was designed for cranes, winches and hoisting appliances and restrict the height of the hook lifting equipment.
VM | 1 | . | 20 | – | V | 2 | 0 | 5 | – | C | |||||||||||||||||
Product Name:
mechanical switch
|
Customer specification | ||||||||||||||||||||||||||
1 bracket (movable)
2 chassis (stationary) |
Connector:
1 flying leads with 400 mm of 2 wire cable 2 flying leads with 400 mm of 3 wire cable 3 flying leads with 400 mm of 4 wire cable 4 AMP Superseal 1.5 plug (2 pins male) 5 AMP Superseal 1.5 plug (3 pins male) 6 AMP Superseal 1.5 plug (4 pins male) |
||||||||||||||||||||||||||
Actuation force, N | |||||||||||||||||||||||||||
Signal output:
T current mode (resistance) V high-side switch (PNP) N low-side switch (NPN) K open contacts |
|||||||||||||||||||||||||||
Status indicator: 0 without indicator L LED indicator | |||||||||||||||||||||||||||
Action logic: 0 current mode 1 normally-open (NO) 2 normally-closed (NC) 3 complementary (NO/NC) |
Actuating weightStandard actuating weight was designed for use with wire rope having a diameter of up to 22 mm. The actuating weights are produced under the other diameters of the rope by the order. Ordering code: Actuating weight 15 [305651015]. |
, | 20 |
, | 10 32 |
, | 400 |
, , | 2,2 |
, , | |
|
16 |
|
45 |
, ° | |
40 +55 | |
60 +65 | |
14254 | IP67 |
, , | 5×105 |
|
50 |
|
50 200 |
, /2, | 100 |
( ), , | 54 × 54 × 59 |
, , | 0,6 |
, | 22 |
, | 3,5 |
( × ) , , | 80 × 85 |
VM1 (on bracket)VM2 (on chassis)