Your friends will be grateful:
Angle Sensors DUG50
Features:
  • versions with single axis or two spatial axes inclinometers
  • protections from vibrations, shocks and high temperatures
  • analog and digital interfaces
  • resistant to salt and dirt, watertight housing

The DUG50 angle sensors measures the angles of slope, elevation or inclination of an item with respect to gravity. The sensors are fully electronic and contains no mechanical moving parts.

It is used in electronic control and rated capacity limiter systems and another applications.

Ordering Code

    DUG   5   0 P   1   1 Z    
Type                                             Additional customer options
Version                                             Connector:
0 — flying leads with 400 mm of cable
1 — AMP Superseal 1.5 plug (4 pins male)
Version:
0 — one axis
1 — two angles of interperpendicular directions
                                            Interface
For digital interface:
1 — RBus
2 — CANopen
For current signal:
1 — от 4 до 20 мА
2 — от 0 до 20 мА
For voltage signal:
1 — 0,5–4,5 V
2 — 0–5 V
                                             
Signal output:
Е — voltage signal
T — current signal
P — digital interface
                                           

Technical Data

Parameter Value
Number of axes single or two
Measuring range for each axis 0 to 110 deg.
Accuracy ±0,5 deg.
Operating temperature range – 40…+55 °C
Storage/Transport temperature range – 60…+80 °C
Supply voltage 10 – 32 V DC
Protection class (to IEC 60529) IP67
Vibration resistance <50 m/sec2 (at 50…200 Hz)
Impact resistance <100 m/sec2
Dimensions 73 × 40 × 25 mm
Weight, approx. 0,12 kg

Dimensions [mm]

© 2000–2019 Rezonans
Contact information