Your friends will be grateful:
Electrohydraulic Proportional Joystick AURSP23.2
Features:
  • four independent analogue outputs
  • directly connect to electrohydraulic valves
  • electronic output signal adjustment for each outputs without additional equipment
  • digital interface for control systems

The joystick was designed for remote proportional and discrete electric control of hydraulic distributor electromagnets.

It includes handle (manipulator) and electronic control unit.

The electronic control unit consists of non-contact handle position sensors, microcontroller-based information-measuring circuit, secondary power supply and smart power switches for current control.

The electronic circuit converts angular displacement of handle into four independent proportional control signals for electrohydraulic valves and produces three control signals for discrete electromagnets after pressing on handle button.

The joystick directly connects to electrohydraulic valves. Limit switches and relay contacts can be switched on between joystick outputs and electrohydraulic valves.

Technical Data

Parameter Value
Outputs:  
  • proportional outputs
    4
    • discrete outputs
      3
      • check outputs
        4
        • cut-off valve output
          1
          Supply voltage 16 – 32 V DC
          Maximum output current for proportional valves:  
          • AURSP23.2 and AURSP23.2-01 versions
            2,1 A
            • AURSP23.2-02 version
              0,85 A
              Maximum output current:  
              • for discrete outputs
                3 A
                • for check outputs
                  10 ma
                  • for cut-off valve output
                    3 A
                    Nominal coil resistance (load resistance):  
                    • AURSP23.2 and AURSP23.2-01 versions
                      2,4 to 0,6 Ohm
                      • AURSP23.2-02 version
                        21 Ohm
                        Nominal coil resistance of actuators and cutt-off valve 10 to 40 Ohm
                        Tilt angle range ±25 deg.
                        Neutral area ±3 deg.
                        Maximum handle force:  
                        • in four basic directions
                          10 N
                          • in directions between the X and Y directions
                            15 N
                            Vibration resistance <50 m/sec2 (at 50…200 Hz)
                            Impact resistance <100 m/sec2
                            Life expectancy >1 million cycles
                            Operating temperature range – 40…+55 °C
                            Storage/Transport temperature range – 60…+85 °C
                            Protection class (to IEC 60529) IP54
                            Dimensions 100 × 100 × 280 mm
                            Weight, approx. 1,5 kg

                            Dimension [mm]

                            Applications example

                            CHMZ DEK-361 crane

                            © 2000–2019 Rezonans
                            Contact information