DC/DC Converter PN24/12.6

  • conversion 24 V DC 12 V DC
  • long-term output current  10A
  • overvoltage, overload and overheat protections
  • output voltage status indicator
  • low level of pulsation of output voltage
  • aluminium housing

A lot of products such as satellite navigators, PDAs, radios, control systems and etc. are available only with 12V operating voltage. The voltage changer PN24/12.5 was designed for uses power 12V products on 24V vehicles.

The converter's scheme was made as pulsed step-down voltage stabilizer without galvanic isolation.

The converter has built-in protections from load short circuit with automatic recovery, current overload, pulsed overvoltage and overtemperature.

PN24/12.6 has output voltage status indicator.

Technical Data

Input voltage range 20… 32 V DC
Output voltage 12,6±0,6 V DC
Maximum output current 10 A
Output voltage ripple 250 mV
Consumed current (at 24 V, no-load) 25 mA
Efficiency (at 27 V, 10 A) 90% typ.
Protection class (to IEC 60529) IP53
Operating temperature range –40…+55 °C
Vibration resistance <50 m/sec2 (at 50…200 Hz)
Impact resistance <100 m/sec2
Dimensions 119 × 69 × 51 mm
Weight, approx. 0,3 kg

Dimensions [mm]

PN24/12.6 overall dimensions

PDF, 326Kb

Phone/fax: +7 (351) 731-30-00, 222-47-77
Mashinostroitelei st., 10-b, Chelyabinsk, 454119, Russian federation